Fault Code Lookup

HVAC Sales Master

E161

Refrigerant leak detector sensor #2 type incorrect

This code typically points to

Wrong sensor type installed on low-GWP input #2

Next checks to confirm

Replace with the correct Lennox-approved sensor type
Retest using the Low GWP test button if needed

Escalation

Low-GWP sensor/type fault

Reset behavior

Clears when a suitable sensor is detected.

Safety Critical

Immediate concern

⚠ Cross-generation conflict

Codes E150, E151, E152, E154, E155, E160, E161, E163, E164, and E390 only exist on K-revision Lennox furnaces (EL195UHNEK, ML196UHEK). These are refrigerant leak detection codes for R-454B A2L compliance. E154/E155 will latch the blower ON for at least 5 minutes regardless of thermostat call — this is a code-mandated safety behavior. A2L refrigerant detection CANNOT be disabled — it's prohibited by safety codes.

Source

Lennox EL195UHNEK Installation Instructions 508575-01, p.46

Look up another code Change brand